# Hi I need to buy a new washer for my in tank fuel

**URL:** <https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746>\
**Category:** Big Block Tonti and Loop Frame models\
**Tags:** caliev\
**Created:** [3 December 2023 15:13 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746 "2023-12-03T15:13:50Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dicky\_Beckett](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dicky\_Beckett](https://forum.motoguzziclub.co.uk/u/Dicky_Beckett)\
**Post date:** [3 December 2023 15:13 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/1 "2023-12-03T15:13:50Z")

</div>

Hi, I need to buy a washer for the in tank fuel solenoid valve but am having no joy with Guzzi Bits. As it is in the fuel tank I need to get the correct type of washer. Has anyone any ideas who might have such a thing ?.  
Thanks

---

<div class="post-metadata">

**Author:** ![Don-Spada](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/don-spada/32/67_2.png) [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)\
**Post date:** [3 December 2023 15:42 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/2 "2023-12-03T15:42:26Z")

</div>

I’m no expert on fuel injection bits, but a note of the model of bike may be a starter.  
Try looking up the part number from the parts book ( Most can be found here [Parts Lists](https://www.guzzitek.org/gb/parts_list_gb.htm) ) Then Google Guzzi followed by the part number, it will often throw up a supplier. How about Fowlers?  
Do you have a photo of the old washer?

---

<div class="post-metadata">

**Author:** ![Dicky\_Beckett](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dicky\_Beckett](https://forum.motoguzziclub.co.uk/u/Dicky_Beckett)\
**Post date:** [3 December 2023 16:20 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/3 "2023-12-03T16:20:04Z")

</div>

Thanks Don-Spada  
My bike is a 2004 Cali EV. I’ll try firn the part number and google.  
Cheers

---

<div class="post-metadata">

**Author:** ![Don-Spada](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/don-spada/32/67_2.png) [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)\
**Post date:** [3 December 2023 17:28 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/4 "2023-12-03T17:28:24Z")

</div>

From a look at the parts book, it doesn’t seem to show a separate washer. Part 17 is the valve in question. That makes me think the washer is part of the whole assembly. Can you find a red fibre washer that will fit and maybe a couple of turns of PTFE tape on the thread if you are worried it may leak.

 ![Cali EV fuel tank](https://forum.motoguzziclub.co.uk/uploads/default/original/2X/9/993b0bc98a8b1e38ff0f07803ce7f6809254e09d.jpeg)

---

<div class="post-metadata">

**Author:** ![Dicky\_Beckett](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dicky\_Beckett](https://forum.motoguzziclub.co.uk/u/Dicky_Beckett)\
**Post date:** [4 December 2023 07:26 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/5 "2023-12-04T07:26:46Z")

</div>

Hi Don-Spada  
Thank you very much for your input it is really useful. I will try and find some Red Fibre Washers that will fit. I am assuming Red Fibre Washer is a type of petrol resistant material ?.  
Also could I ask you two further questions :-

1] Regarding the fuel level sensor (#18 on the parts drawing. My fuel light did not light up during my last ride out leading me to run out of fuel !!!. I have taken the fuel level sensor out and am not sure if it is a thermistor or a simple on/off switch. Do you know ?.  
2] Can you send me the link to the manual that has the parts drawing you have sent. The manual I am working from does not seem to be as comprehensive a drawing as you have so I am wondering if I have the best one.

Much appreciated 🙂

---

<div class="post-metadata">

**Author:** ![Nik\_Wallis](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/nik_wallis/32/2741_2.png) [@Nik\_Wallis](https://forum.motoguzziclub.co.uk/u/Nik_Wallis)\
**Post date:** [4 December 2023 09:15 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/6 "2023-12-04T09:15:40Z")

</div>

Hi  
PM me your address and i will send you one in the post. I have a few spare.  
Nik

---

<div class="post-metadata">

**Author:** ![Dicky\_Beckett](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dicky\_Beckett](https://forum.motoguzziclub.co.uk/u/Dicky_Beckett)\
**Post date:** [4 December 2023 09:18 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/7 "2023-12-04T09:18:18Z")

</div>

Hi Nik, that would be amazing…  
Not sure how to PM but here is my address  
23 Beaumont Gardens  
Poulton  
Lancashire  
FY6 7NX

Thanks again

---

<div class="post-metadata">

**Author:** ![Don-Spada](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/don-spada/32/67_2.png) [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)\
**Post date:** [4 December 2023 09:21 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/8 "2023-12-04T09:21:11Z")

</div>

Red fibre washers have been used for sealing petrol taps etc for years. The other option is to use Dowty washers, they are a bonded metal and rubber seal, use the Viton ones as that is best for petrol

> **[Dowty Washer/Bonded Seals Metric/Imperial Nitrile/Viton Mild/Stainless Steel...](https://www.ebay.co.uk/itm/233523149729?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9HJeE7KdSPK&sssrc=2047675&ssuid=3IERzJtHSVq&widget_ver=artemis&media=COPY)**
>
> Available in mild steel, 316 stainless steel and Nitrile for standard temperature or Viton for high temperature applications. Viton: -20 deg C to +205 deg C. 1/8" BSP 15.88mm 11.84mm 10.37mm 2.00mm 8.46mm.

I have read that the fuel sensor uses a reed switch, have alook at this page.

> **[Magnetic Reed Switch](https://dpguzzi.com/reed.htm)**

The parts book was from the Guzzitek here  
[https://www.guzzitek.org/parts\_list/gb/1100/CalifEV\_EVTour\_PI\_02\_PL.pdf](https://www.guzzitek.org/parts_list/gb/1100/CalifEV_EVTour_PI_02_PL.pdf)

---

<div class="post-metadata">

**Author:** ![Dicky\_Beckett](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dicky\_Beckett](https://forum.motoguzziclub.co.uk/u/Dicky_Beckett)\
**Post date:** [4 December 2023 09:36 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/9 "2023-12-04T09:36:31Z")

</div>

Thanks so much…

---

<div class="post-metadata">

**Author:** ![Barry\_Conway](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/barry_conway/32/112_2.png) [@Barry\_Conway](https://forum.motoguzziclub.co.uk/u/Barry_Conway)\
**Post date:** [4 December 2023 12:47 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/10 "2023-12-04T12:47:00Z")

</div>

Hey Dicky - it is strongly advised that you DO NOT post personally identifying details in this (or any other) online forum.

To send messages to other members, just click on their “icon” and you’ll see a card with details that they wish to share, and a “button” via which you can message them.

---

<div class="post-metadata">

**Author:** ![Ratt](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/r/c37758/32.png) [@Ratt](https://forum.motoguzziclub.co.uk/u/Ratt)\
**Post date:** [8 December 2023 13:34 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/11 "2023-12-08T13:34:33Z")

</div>

Has anyone pet sealed their tank on an EV concerned about my Vintage but with the pump n filter in tank I assume a plate must be fitted with the gubbins out to start the process? Why did they do this early EVs had the filter pump in a side panel. Once had great difficulty getting the un quick release fuel pipe off ended up grinding down a push bike spanner to do it madness. Regards Ratt

---

<div class="post-metadata">

**Author:** ![Speedy23](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/s/b77776/32.png) [@Speedy23](https://forum.motoguzziclub.co.uk/u/Speedy23)\
**Post date:** [8 December 2023 18:36 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/12 "2023-12-08T18:36:01Z")

</div>

As ever, rest assured there is a factory tool that will make the job easy-peasy . Just tuff tit if you ain’t got one.

I had my SP1000 for 2 years before I found out that there was a tool to loosen the nuts holdiing the points housing so you could do the timing without burning yer knuckles!

---

<div class="post-metadata">

**Author:** ![Hayden](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/hayden/32/1424_2.png) [@Hayden](https://forum.motoguzziclub.co.uk/u/Hayden)\
**Post date:** [10 December 2023 14:05 UTC](https://forum.motoguzziclub.co.uk/t/hi-i-need-to-buy-a-new-washer-for-my-in-tank-fuel/16746/13 "2023-12-10T14:05:47Z")

</div>

themistor is for temperature in standard use.
