# Nevada Trike

**URL:** <https://forum.motoguzziclub.co.uk/t/nevada-trike/17438>\
**Category:** Miscellaneous and universal issues\
**Tags:** nevada, trike, brakes\
**Created:** [19 February 2024 21:57 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438 "2024-02-19T21:57:58Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cymro](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Cymro](https://forum.motoguzziclub.co.uk/u/Cymro)\
**Post date:** [19 February 2024 21:57 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/1 "2024-02-19T21:57:58Z")

</div>

I have bought a Nevada with a Reliant rear axle. The rear brake master cylinder seems inadequate for the 2 drum brake cylinders.  
What larger master cylinder would fit, I see 13mm bore ones on ebay that might pump a greater amount of brake fluid.  
Any suggestions would be greatly appreciated.  
Many thanks, John

---

<div class="post-metadata">

**Author:** ![Don-Spada](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/don-spada/32/67_2.png) [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)\
**Post date:** [20 February 2024 09:02 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/2 "2024-02-20T09:02:07Z")

</div>

What size does it have fitted at the moment?

---

<div class="post-metadata">

**Author:** ![Barry\_Conway](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/barry_conway/32/112_2.png) [@Barry\_Conway](https://forum.motoguzziclub.co.uk/u/Barry_Conway)\
**Post date:** [20 February 2024 10:15 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/3 "2024-02-20T10:15:23Z")

</div>

I’m not even going to attempt to suggest anything, given my total lack of mechanical sensibilities, but I can offer this:

Guzziology contains a whole chapter on brakes, and specific sections within that on “improving braking power” and “de-integrating brakes” with guidance (suggestions) on changing master cylinders, callipers, and brake discs for various situations. No specific mention of trikes, certainly, but I think that begging, borrowing or, um, buying a copy of that tome\* might be a very good investment.

Hope this helps.

P.S. If you don’t know of Guzziology, more here: [https://www.daverichardson.biz/](https://www.daverichardson.biz/)

Secondhand copies do come up, Gutsibits (for one) stock hard copies, and it’s also available for kindles/tablets (I believe).

\*Buy, if you can. The author deserves recompense for this indispensable resource.

---

<div class="post-metadata">

**Author:** ![Brian.Dillamore](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/brian.dillamore/32/121_2.png) [@Brian.Dillamore](https://forum.motoguzziclub.co.uk/u/Brian.Dillamore)\
**Post date:** [20 February 2024 12:10 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/4 "2024-02-20T12:10:29Z")

</div>

Some people with trikes will use a cable to a modified master cylinder off a car as there is a bit of space at the back.

whether that will help you in any way, I don’t know.

---

<div class="post-metadata">

**Author:** ![Don-Spada](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/don-spada/32/67_2.png) [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)\
**Post date:** [20 February 2024 13:27 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/5 "2024-02-20T13:27:44Z")

</div>

The rear brake on a Florida would have been operating 2 twin piston calipers so would have been moving a fair bit of fluid. Your Reliant will have a single piston slave cylinder on each side so needs much less fluid movement.  
Is the pedal very solid? I do believe that you would actually need a smaller master cylinder. Have a read of this article…

> **[Effects of Master Cylinder Bore Size on Your Brake System](https://www.speedwaymotors.com/the-toolbox/effects-of-master-cylinder-bore-size-on-your-brake-system/30895)**
>
> Follow this guide to learn how the change of bore size on a master cylinder affects a four-wheel disc brake system. View the conversion chart to figure the total bore area for your brake setup.

---

<div class="post-metadata">

**Author:** ![Cymro](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Cymro](https://forum.motoguzziclub.co.uk/u/Cymro)\
**Post date:** [20 February 2024 13:42 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/6 "2024-02-20T13:42:30Z")

</div>

Thank you all for your suggestions. It has only just occurred to me that my Mille GT had a master cylinder large enough to operate the back brake and also one calliper at the front via the linked brake system. Maybe that would have been as the Florida suggestion. Will have to investigate that option. Thanks all again.

---

<div class="post-metadata">

**Author:** ![sidthedid](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/sidthedid/32/729_2.png) [@sidthedid](https://forum.motoguzziclub.co.uk/u/sidthedid)\
**Post date:** [20 February 2024 14:16 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/7 "2024-02-20T14:16:20Z")

</div>

any photos of the trike? never seen a guzzi trike, always seem to be that other kind of v twin with the engine the wrong way round

---

<div class="post-metadata">

**Author:** ![Cymro](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Cymro](https://forum.motoguzziclub.co.uk/u/Cymro)\
**Post date:** [20 February 2024 15:47 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/8 "2024-02-20T15:47:43Z")

</div>

Having it hopefully on Friday so will put some pictures up then.

---

<div class="post-metadata">

**Author:** ![guzzibrat](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/guzzibrat/32/601_2.png) [@guzzibrat](https://forum.motoguzziclub.co.uk/u/guzzibrat)\
**Post date:** [21 February 2024 08:09 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/9 "2024-02-21T08:09:52Z")

</div>

May be with a look at a trike specialty. The few builds that I know of have included a lot in f attention to rear brakes. Drums and extra weight will need a bit of extra help.  
Good luck.

---

<div class="post-metadata">

**Author:** ![Cymro](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Cymro](https://forum.motoguzziclub.co.uk/u/Cymro)\
**Post date:** [21 February 2024 09:47 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/10 "2024-02-21T09:47:06Z")

</div>

Hi, it has been a rike with drum brakes for about 16 years. I do intend looking at a disk conversion when funds allow but in the meantime just want to improve the brakes as they are.

---

<div class="post-metadata">

**Author:** ![guzzibrat](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/guzzibrat/32/601_2.png) [@guzzibrat](https://forum.motoguzziclub.co.uk/u/guzzibrat)\
**Post date:** [21 February 2024 15:01 UTC](https://forum.motoguzziclub.co.uk/t/nevada-trike/17438/11 "2024-02-21T15:01:18Z")

</div>

Excellent resource👍
