# oil viscosity

**URL:** <https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256>\
**Category:** General Banter\
**Created:** [5 September 2019 17:15 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256 "2019-09-05T17:15:14Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![luv2andy](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/l/a9adbd/32.png) [@luv2andy](https://forum.motoguzziclub.co.uk/u/luv2andy)\
**Post date:** [5 September 2019 17:15 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/1 "2019-09-05T17:15:14Z")

</div>

Good evening. Today I checked the bevel drive/ shaft drive/ final drive (?) on my new ( to me ) 1979 T3 California. There is a leak from the inspection plug. I took it off and black oil is nasty looking; so I decided to give it an oil change. Whilst I have a manual that states adding a portion of Moly to the 90w it is an old manual. I presume (?) that modern oils will suffice without this addition ? Looking here I cannot locate any info ; I have tried without success by putting in search terms such as Viscosity/Shaft/Bevel etc. oils etc. etc. however I have found no thread whatsoever in regard to the preferred or acknowledged oil / viscosity. Searching the web I found reference to 85 /140w ? --90w --85/90w-- who knows ? I certainly do not. Can anyone please guide me here to a simple answer ?

---

<div class="post-metadata">

**Author:** ![v7john](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/v7john/32/46_2.png) [@v7john](https://forum.motoguzziclub.co.uk/u/v7john)\
**Post date:** [5 September 2019 21:50 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/2 "2019-09-05T21:50:21Z")

</div>

I still use 85W90 in my drive boxes (you can’t get SAE90 anymore as far as I know) plus Moly additive from Halfords. It’s really not a great additional expense. I’ve heard people say that the additive’s not needed with modern oils. My question would be, which modern oils? I’ve only left the additive out once when I couldn’t find any. It might be just a coincidence but that was when the pinion gear broke up and lost some teeth.

---

<div class="post-metadata">

**Author:** ![Barry\_Conway](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/barry_conway/32/112_2.png) [@Barry\_Conway](https://forum.motoguzziclub.co.uk/u/Barry_Conway)\
**Post date:** [6 September 2019 07:19 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/3 "2019-09-06T07:19:14Z")

</div>

Same here. Only thing I’ve ever looked for in Halfords, fully expecting not to find, but did.

Got a little ‘classic oils’ place near me that sells 90W gearbox oil too, so I’m still doing what I always did.

---

<div class="post-metadata">

**Author:** ![luv2andy](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/l/a9adbd/32.png) [@luv2andy](https://forum.motoguzziclub.co.uk/u/luv2andy)\
**Post date:** [6 September 2019 15:01 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/4 "2019-09-06T15:01:21Z")

</div>

Thanks for the replies.  
I have searched further and found Castrol still makes and sells 90w. A company called “Lubetech” ( [https://www.lubetechshop.co.uk/](https://www.lubetechshop.co.uk/) ) sell Exol oils . Colin is a very helpful guy, I’ve bought different oils from him for a long time; they also sell straight 90w. The best find, however, is Wilco. ( Not Wilko btw ) They sell Comma oils, and list two 80/90w gear oils. I contacted them, ( Comma ) they suggested the EP80/90 GL5. It’s expensive @ £4.99 🙂 1 litre.

---

<div class="post-metadata">

**Author:** ![ranton\_rambler](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/r/e480ec/32.png) [@ranton\_rambler](https://forum.motoguzziclub.co.uk/u/ranton_rambler)\
**Post date:** [6 September 2019 16:19 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/5 "2019-09-06T16:19:59Z")

</div>

The big blocks use “90” oil in the bevel box - I got my last lot from B&Q who were flogging off some old stock Castrol stuff for £1/litre so I cleared the shelf for them. Only 1 left now sadly.  
I vaguely remember a cautionary note about GL5 compatibility with yellow metals, but would have to go hunting for anything more useful.  
The small blocks use “140” oil - I think they run hotter. I have only come across multigrade versions of that, e.g. 85W-140.  
Ian

---

<div class="post-metadata">

**Author:** ![Mike\_H](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/mike_h/32/93_2.png) [@Mike\_H](https://forum.motoguzziclub.co.uk/u/Mike_H)\
**Post date:** [6 September 2019 21:24 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/6 "2019-09-06T21:24:25Z")

</div>

An oil thread! 😆

Just for the record, my Spada had Castrol Grand Prix, because it was closest match (according to Castrol) to the originally specified SINT 2000

G/box & FD had SAE 90 (again Castrol?)

The later 850 LM went with Silkolene 4-stroke oil 10-W40 & as above for transmission.

Then I switched to a 20-W50 because of it getting very thin in hot weather and the oil pressure light getting very friendly & winking at me a lot (but only at idle).

But latterly the g/box & FD both got a SAE 85-W140 (because was recommended on Guzzi club forum a few years ago) plus a dash of Molyslip in each (10cc FD 20cc g/box IIRC); the g/box had slicker & smoother gear changes as a result, the FD seemed to run cooler, whereas before I couldn’t leave my fingers on it after a good run.

HTH

---

<div class="post-metadata">

**Author:** ![luv2andy](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/l/a9adbd/32.png) [@luv2andy](https://forum.motoguzziclub.co.uk/u/luv2andy)\
**Post date:** [6 September 2019 22:42 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/7 "2019-09-06T22:42:44Z")

</div>

[https://www.wilcodirect.co.uk/product/gear-oil/comma-ep85w-140-gear-oil-1-litre-co-hmg1l/CO-HMG1L](https://www.wilcodirect.co.uk/product/gear-oil/comma-ep85w-140-gear-oil-1-litre-co-hmg1l/CO-HMG1L) ( The plot (?) thickens )

---

<div class="post-metadata">

**Author:** ![luv2andy](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/l/a9adbd/32.png) [@luv2andy](https://forum.motoguzziclub.co.uk/u/luv2andy)\
**Post date:** [6 September 2019 22:47 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/8 "2019-09-06T22:47:48Z")

</div>

It seems GL5 was initially not suitable : however modern oil production has it sorted. see 1.40 here…

[https://www.youtube.com/watch?v=XHwULF-EdtQ](https://www.youtube.com/watch?v=XHwULF-EdtQ)

---

<div class="post-metadata">

**Author:** ![RayS](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/rays/32/10_2.png) [@RayS](https://forum.motoguzziclub.co.uk/u/RayS)\
**Post date:** [7 September 2019 08:33 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/9 "2019-09-07T08:33:20Z")

</div>

[  
But latterly the g/box & FD both got a SAE 85-W140 (because was recommended on Guzzi club forum a few years ago) plus a dash of Molyslip in each (10cc FD 20cc g/box IIRC); the g/box had slicker & smoother gear changes as a result, the FD seemed to run cooler, whereas before I couldn’t leave my fingers on it after a good run.

[/quote]

I found this to be the case too with my 1000S.

---

<div class="post-metadata">

**Author:** ![guzzibrat](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/guzzibrat/32/601_2.png) [@guzzibrat](https://forum.motoguzziclub.co.uk/u/guzzibrat)\
**Post date:** [9 September 2019 09:09 UTC](https://forum.motoguzziclub.co.uk/t/oil-viscosity/3256/10 "2019-09-09T09:09:55Z")

</div>

Lack of information on the forum is probably due to loss of a significant amount of archive material a while ago.  
Switched to 85/140 with Moly added for all Guzzis some years ago.  
Based on not wanting to stock two lots of oil and long conversations with the tech people at the wholesaler/refinery/blender that I was buying my oil from.  
No problems to date with wear or leaks.  
Steve
