# Rear axle paddock stand bobbins?

**URL:** https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073
**Category:** Big Block Tonti and Loop Frame models
**Created:** [17 January 2014 19:03 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073 "2014-01-17T19:03:45Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [17 January 2014 19:03 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073/1 "2014-01-17T19:03:45Z")

</div>

Does anyone know where I can get paddock stand bobbins for the rear axle on a tonti frame racer? I suppose it might even replace the axle altogether if there were an extended axle available.  
Thanks

---

<div class="post-metadata">

### Author: ![guzzibrat](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/guzzibrat/32/601_2.png) [@guzzibrat](https://forum.motoguzziclub.co.uk/u/guzzibrat)
#### Post date: [19 January 2014 20:00 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073/2 "2014-01-19T20:00:55Z")

</div>

You could try a small (local) engineering firm.  
Not too difficult to know up on a lathe if you have the design/dimensions.  
Best of luck  
Steve

---

<div class="post-metadata">

### Author: ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [19 January 2014 21:14 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073/3 "2014-01-19T21:14:15Z")

</div>

I bought mine from Harris engineering.

---

<div class="post-metadata">

### Author: ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [19 January 2014 21:29 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073/4 "2014-01-19T21:29:44Z")

</div>

OK that’s great, thanks. I am maybe thinking of getting a complete axle turned with integral bobbins, so will update if so.

How did the Harris bobbins fit on though?  
Cheers Steve Mr Noisy2014-01-19 21:34:32

---

<div class="post-metadata">

### Author: ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [20 January 2014 13:11 UTC](https://forum.motoguzziclub.co.uk/t/rear-axle-paddock-stand-bobbins/1073/5 "2014-01-20T13:11:04Z")

</div>

A friend welded in some inserts so I could fit them.