# Rear end strip
**URL:** https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034
**Category:** Miscellaneous and universal issues
**Created:** [28 December 2013 13:50 UTC](https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034 "2013-12-28T13:50:39Z")
**Posts on this page:** 3
**Page:** 2
### Author:  [@tris](https://forum.motoguzziclub.co.uk/u/tris)
#### Post date: [1 January 2014 12:55 UTC](https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034/21 "2014-01-01T12:55:58Z")
> [@Doug McLaren](#):
>
> I’ve had four big block Guzzis and have never seen any wavy washer between U/J and bearing, The U/J’s on mine have always been a bit more of a push fit rather than interference fit, the latter suggests to me a bit more of a heave required to get them apart or together again.
> The swinging arm pivot pins should be equidistant, it’s a fine thread so should be easy enough to adjust.
Thanks, your description of the UJ fit is exactly what I’ve got and now they’ve been separated over night the fit is a bit tighter.
UJ might have to go into the freezer for a bit of a chill to make things easier before I put it back together
---
### Author:  [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [1 January 2014 14:15 UTC](https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034/22 "2014-01-01T14:15:52Z")
Bearing bond to prevent the uj spinning in the carrier does no harm
---
### Author:  [@tris](https://forum.motoguzziclub.co.uk/u/tris)
#### Post date: [1 January 2014 16:47 UTC](https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034/23 "2014-01-01T16:47:50Z")
> [@lawries](#):
>
> Bearing bond to prevent the uj spinning in the carrier does no harm
Is that just loctite or something special?
[Previous page](https://forum.motoguzziclub.co.uk/t/rear-end-strip/1034.md?page=1)