# Relays V 50

**URL:** <https://forum.motoguzziclub.co.uk/t/relays-v-50/2148>\
**Category:** Small Block V Twins (not new V7s)\
**Created:** [7 February 2016 13:46 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148 "2016-02-07T13:46:59Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)\
**Post date:** [7 February 2016 13:46 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/1 "2016-02-07T13:46:59Z")

</div>

Hi everyone

A few years back when I had my Cali 1100i I replaced all the relays from some chap in America, very cheap and very good. I think I got his details from the forum.

Trouble is that was probably nearly ten years ago and I can’t find any posts as I lapsed membership for a while.

Can anyone steer me in the right direction please. This time for a V50

Cheers

Ian

---

<div class="post-metadata">

**Author:** ![JohnnyRocket](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/j/e47c2d/32.png) [@JohnnyRocket](https://forum.motoguzziclub.co.uk/u/JohnnyRocket)\
**Post date:** [7 February 2016 14:35 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/2 "2016-02-07T14:35:49Z")

</div>

From other forums come recommended Eastern Beaver in the States.

---

<div class="post-metadata">

**Author:** ![driptray](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/d/e56c9b/32.png) [@driptray](https://forum.motoguzziclub.co.uk/u/driptray)\
**Post date:** [8 February 2016 15:34 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/3 "2016-02-08T15:34:06Z")

</div>

Pyro Dan in the USA .

---

<div class="post-metadata">

**Author:** ![iandunmore](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/iandunmore/32/30_2.png) [@iandunmore](https://forum.motoguzziclub.co.uk/u/iandunmore)\
**Post date:** [8 February 2016 16:17 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/4 "2016-02-08T16:17:48Z")

</div>

The V!! relays were notoriously crap.  
I have not heard the same for V50’s.  
Halfords should do.  
Use 40 amp ones as they are then all interchangeable with the start relay for fault finding.

---

<div class="post-metadata">

**Author:** ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)\
**Post date:** [10 February 2016 05:46 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/5 "2016-02-10T05:46:20Z")

</div>

Cheers everyone

Great info and don’t know why I never thought of halfords. Will give it a try

Cheers

Ian

---

<div class="post-metadata">

**Author:** ![Brushwarrior](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/brushwarrior/32/61_2.png) [@Brushwarrior](https://forum.motoguzziclub.co.uk/u/Brushwarrior)\
**Post date:** [9 April 2016 20:16 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/6 "2016-04-09T20:16:50Z")

</div>

Dan Prunuske in the USA sells those mini relays and higher than standard spec. Although the Bosch ones sold through a dealer are alot better. If relay is normal size on a V50 series, then also try Vehicle Wiring Products near Derby. Great service and catalogue. Most local auto electrics places should be able to assist.

Hope this helps further?

---

<div class="post-metadata">

**Author:** ![Mike\_H](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/mike_h/32/93_2.png) [@Mike\_H](https://forum.motoguzziclub.co.uk/u/Mike_H)\
**Post date:** [10 April 2016 20:07 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/7 "2016-04-10T20:07:33Z")

</div>

Have to confess always a bit bemused when I read about folk replacing all their relays have never had any bother with any over quite a few years EXCEPT where terminals have got corroded, then they are not to be relied upon usually, even after much cleaning and scraping of said terminals. I did have one relay break a coil wire inside but that was entirely my fault for putting it in a stupid place where it was subjected to excessive vibration. Can’t remember any other failures.

---

<div class="post-metadata">

**Author:** ![Brushwarrior](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/brushwarrior/32/61_2.png) [@Brushwarrior](https://forum.motoguzziclub.co.uk/u/Brushwarrior)\
**Post date:** [24 April 2016 17:02 UTC](https://forum.motoguzziclub.co.uk/t/relays-v-50/2148/8 "2016-04-24T17:02:47Z")

</div>

Good point Mike.
