# Speedometer KM's to MPH

**URL:** https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144
**Category:** Small Block V Twins (not new V7s)
**Created:** [2 February 2016 19:45 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144 "2016-02-02T19:45:08Z")
**Posts on this page:** 13
**Page:** 1

<div class="post-metadata">

### Author: ![Skipjack69](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/s/d78d45/32.png) [@Skipjack69](https://forum.motoguzziclub.co.uk/u/Skipjack69)
#### Post date: [2 February 2016 19:45 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/1 "2016-02-02T19:45:08Z")

</div>

I have a 84 V35ll with a Kilometer speedometer and I wish to fit a MPH speedometer I know it will bolt straight on but do I have to fit a different ratio speedo drive to the front wheel .  
Could anyone tell me what the ratio on the drive is for the Kilometer speedo and could anyone tell me what the ratio is for the MPH speedo drive

---

<div class="post-metadata">

### Author: ![francjul](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/f/57b2e6/32.png) [@francjul](https://forum.motoguzziclub.co.uk/u/francjul)
#### Post date: [2 February 2016 20:02 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/2 "2016-02-02T20:02:25Z")

</div>

It is possible to work out the drive ratio. All to do with wheel circumference/rotation and road speed. The two speedos I suspect are the same internally and the face is changed. Another method would be to fit temporarily a push bike speedo. Then run the bike at 30mph and note where the needle is on the km speedo. Then repeat this for other important speed limits. When done mark it onto the old km speedo. You could take of the face and using DTP design your own face to match the other side. Print it out laminate it and stick it in the old case. This would be an interesting challenge.  
All the best.

---

<div class="post-metadata">

### Author: ![Exmembers](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/e/ce73a5/32.png) [@Exmembers](https://forum.motoguzziclub.co.uk/u/Exmembers)
#### Post date: [2 February 2016 21:33 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/3 "2016-02-02T21:33:46Z")

</div>

I took a chance on a straight swap, as the needle positions on the MPH speedo I found looked to be in the correct place on the original KPH speedometer. Fitted and took it out for a run using a GPS speedo as a check, and it was all good, no other changes needed. Have to admit a slight sense of amazement 🙂

---

<div class="post-metadata">

### Author: ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)
#### Post date: [3 February 2016 08:01 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/4 "2016-02-03T08:01:07Z")

</div>

It does make sense that they are easy to swap, the different instruments are bought by the factory and bolt onto identical models whether they are for UK/USA or the rest of the world.

I could of course be wrong 😃

---

<div class="post-metadata">

### Author: ![Mike\_H](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/mike_h/32/93_2.png) [@Mike\_H](https://forum.motoguzziclub.co.uk/u/Mike_H)
#### Post date: [3 February 2016 17:06 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/5 "2016-02-03T17:06:36Z")

</div>

Yes far simpler to just have different dials.

I changed a kilos speedo to mph one for my Tonti, same thing.

---

<div class="post-metadata">

### Author: ![Skipjack69](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/s/d78d45/32.png) [@Skipjack69](https://forum.motoguzziclub.co.uk/u/Skipjack69)
#### Post date: [5 February 2016 20:38 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/6 "2016-02-05T20:38:19Z")

</div>

Many thanks for the information guys

---

<div class="post-metadata">

### Author: ![guzzi-v35](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/g/e95f7d/32.png) [@guzzi-v35](https://forum.motoguzziclub.co.uk/u/guzzi-v35)
#### Post date: [20 February 2016 19:25 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/7 "2016-02-20T19:25:31Z")

</div>

id buy a UK spec speedo head from Gutsibits or reboot and pop it in. much less hastle

---

<div class="post-metadata">

### Author: ![Mike\_H](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/mike_h/32/93_2.png) [@Mike\_H](https://forum.motoguzziclub.co.uk/u/Mike_H)
#### Post date: [21 February 2016 10:38 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/8 "2016-02-21T10:38:00Z")

</div>

That’s what he’s going to do, the question was does it need a different drive gear gubbins … 😃

And the answer is, no. 😉

---

<div class="post-metadata">

### Author: ![rapheal\_glynn](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/r/90ced4/32.png) [@rapheal\_glynn](https://forum.motoguzziclub.co.uk/u/rapheal_glynn)
#### Post date: [21 February 2016 14:10 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/9 "2016-02-21T14:10:47Z")

</div>

if not send it to speedy cables and they can clean it for you and fit a different face, although the mileometer with still register in Kms

---

<div class="post-metadata">

### Author: ![djpockets](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/djpockets/32/49_2.png) [@djpockets](https://forum.motoguzziclub.co.uk/u/djpockets)
#### Post date: [27 July 2016 16:59 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/10 "2016-07-27T16:59:41Z")

</div>

An easier solution would be to fit a geared kph to mph convertor.  
These are a small unit that simply fits into the back of the speedo, where the cable would go. Then the cable goes into that.  
I got one years ago from MandP for a grey import I had. The speedo then reads in mph. You also get a “mph” sticker to go on the speedo glass.  
Don’t know if they are still available but worth a try.

---

<div class="post-metadata">

### Author: ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)
#### Post date: [28 July 2016 08:26 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/11 "2016-07-28T08:26:54Z")

</div>

> [@djpockets](#):
>
> An easier solution would be to fit a geared kph to mph convertor.  
> These are a small unit that simply fits into the back of the speedo, where the cable would go. Then the cable goes into that.  
> I got one years ago from MandP for a grey import I had. The speedo then reads in mph.

I have heard of these before too, not sure if you can still get them though.

> [@djpockets](#):
>
> You also get a “mph” sticker to go on the speedo glass.  
> Don’t know if they are still available but worth a try.

Someone said these are now illegal so you will either need a new dial (Speedy Cables or other instrument restorers as noted above) or mark the face with whatever is to hand tape/paint/bird poo 😃

---

<div class="post-metadata">

### Author: ![Skipjack69](https://forum.motoguzziclub.co.uk/letter_avatar_proxy/v4/letter/s/d78d45/32.png) [@Skipjack69](https://forum.motoguzziclub.co.uk/u/Skipjack69)
#### Post date: [26 August 2016 10:04 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/12 "2016-08-26T10:04:33Z")

</div>

I managed to find a decent MPH speedo head and replaced the old KPH head with it I checked the speed with other bikes and it register the correct speed and mileage .

---

<div class="post-metadata">

### Author: ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)
#### Post date: [26 August 2016 10:12 UTC](https://forum.motoguzziclub.co.uk/t/speedometer-kms-to-mph/2144/13 "2016-08-26T10:12:03Z")

</div>

Well done 😃
