# Stainless steel exhaust clamps - NOW RESOLVED

**URL:** <https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515>\
**Category:** General Banter\
**Created:** [13 August 2026 10:00 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515 "2026-08-13T10:00:06Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)\
**Post date:** [13 August 2026 10:00 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/1 "2026-08-13T10:00:06Z")

</div>

I bought a stainless steel exhaust system for my bike over 30 years ago and after 3 house moves and the bike in boxes for 25 years I have misplaced one of the clamps. The trouble is that I cannot remember who I bought the system from!

The one I need is the smaller one in the photo below that has an inside diameter of 41mm, has anyone got any idea who might have made these?

 ![PHOTO-2026-08-13-09-58-00](https://forum.motoguzziclub.co.uk/uploads/default/original/2X/3/3bddb81bbcfcf93bfaea810a4b828d5da854b7be.jpeg)

The silencers were huge bulbous affairs and had adjustable baffles for street/track but I didn’t like the look of them at all and also at the most open setting they were still to restrictive. So I cut the ends off removed the baffles and replaced them with perforated stainless tube with a plate on the upstream end of the perforated tube, then rewelded the ends back on. They were then far too loud so I packed around the perforated tube with mineral wool, still to loud and still too ugly.

 ![Guzzi 3](https://forum.motoguzziclub.co.uk/uploads/default/original/2X/e/e97a970a1a1fbcba03ad5e21e41702008a00e61b.jpeg)

The best part of the set up were the custom curved downpipes that I got them to replicate original 750S ones with a continuous curve rather than curve/straight/curve that were standard fare.

So anyone have any idea who made these? I believe that it was not Keihan Systems but I think they came from the north of England. Any thoughts?

Many thanks Chris

---

<div class="post-metadata">

**Author:** ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)\
**Post date:** [13 August 2026 10:29 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/2 "2026-08-13T10:29:16Z")

</div>

Hello again

I have had a thought it might have been O & S? Any bells? Do they still exist?

Many thanks Chris

---

<div class="post-metadata">

**Author:** ![Barry\_Conway](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/barry_conway/32/112_2.png) [@Barry\_Conway](https://forum.motoguzziclub.co.uk/u/Barry_Conway)\
**Post date:** [13 August 2026 10:38 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/3 "2026-08-13T10:38:17Z")

</div>

O&S were associated with the workshop guy near Staffs I think? They folded afaik, retired? I bought some nice Stainless items from them.

---

<div class="post-metadata">

**Author:** ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)\
**Post date:** [13 August 2026 13:38 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/4 "2026-08-13T13:38:02Z")

</div>

I found three old chrome ones in the garage so I will be ok to go but I’ve just bought one from Keihan for £10.00 + postage so sorted now.

Many thanks Chris

---

<div class="post-metadata">

**Author:** ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)\
**Post date:** [13 August 2026 14:31 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/5 "2026-08-13T14:31:19Z")

</div>

I have contacted NBS as Barry thinks they may have inherited O&S’s stock, I would prefer a clamp that matches the other 3 so I have put Keihan on hold.

Many thanks Barry

Watch this space

Best wishes Chris

---

<div class="post-metadata">

**Author:** ![Chris950s](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/chris950s/32/43_2.png) [@Chris950s](https://forum.motoguzziclub.co.uk/u/Chris950s)\
**Post date:** [14 August 2026 10:41 UTC](https://forum.motoguzziclub.co.uk/t/stainless-steel-exhaust-clamps-now-resolved/24515/6 "2026-08-14T10:41:21Z")

</div>

Just called NBS and they do not have any O&S stock anymore. I have ordered from Kiehan.

Apparently the ones I have were made by Roy at O&S maybe I can get one made if I get itchy and scratchy, maybe I’ll just fit the odd clamps and get on with finishing the bike!

My friend Stuffy who has a polishing kit has cleaned up the rest of the O&S exhaust system!

Happy days!

 ![IMG_4906](https://forum.motoguzziclub.co.uk/uploads/default/original/2X/9/970cfd308e6b1852faaf13fde16d2cd57b98f064.jpeg)
