# switch

**URL:** <https://forum.motoguzziclub.co.uk/t/switch/391>\
**Category:** All CARC models\
**Created:** [3 December 2012 11:48 UTC](https://forum.motoguzziclub.co.uk/t/switch/391 "2012-12-03T11:48:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PhillR](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/phillr/32/16_2.png) [@PhillR](https://forum.motoguzziclub.co.uk/u/PhillR)\
**Post date:** [3 December 2012 11:48 UTC](https://forum.motoguzziclub.co.uk/t/switch/391/1 "2012-12-03T11:48:58Z")

</div>

Just bought some oxford hot grips for the Norge standard ones have stopped working and were useless.I want to put a switch in the circuit so I can switch them off rather than rely on the techy bit in the unit.Do i put the switch in the earth side or should i put it in the live side up to the control unit.Thanks

---

<div class="post-metadata">

**Author:** ![iandunmore](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/iandunmore/32/30_2.png) [@iandunmore](https://forum.motoguzziclub.co.uk/u/iandunmore)\
**Post date:** [3 December 2012 12:10 UTC](https://forum.motoguzziclub.co.uk/t/switch/391/2 "2012-12-03T12:10:46Z")

</div>

+ve side before the control unit.  
I do not know its power drain so do not know if a relay is then advised. Though a relay can never be a bad thing.  
Definitly via a fuse.

---

<div class="post-metadata">

**Author:** ![Mad\_Farquhar](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/mad_farquhar/32/741_2.png) [@Mad\_Farquhar](https://forum.motoguzziclub.co.uk/u/Mad_Farquhar)\
**Post date:** [3 December 2012 12:14 UTC](https://forum.motoguzziclub.co.uk/t/switch/391/3 "2012-12-03T12:14:07Z")

</div>

> [@PhillR](#):
>
> I want to put a switch in the circuit so I can switch them off rather than rely on the techy bit in the unit.

Techy bit works ok for me. You are just adding more complexity IMHO.

---

<div class="post-metadata">

**Author:** ![PhillR](https://forum.motoguzziclub.co.uk/user_avatar/forum.motoguzziclub.co.uk/phillr/32/16_2.png) [@PhillR](https://forum.motoguzziclub.co.uk/u/PhillR)\
**Post date:** [3 December 2012 13:07 UTC](https://forum.motoguzziclub.co.uk/t/switch/391/4 "2012-12-03T13:07:16Z")

</div>

Hi IanThe unit says it draws 4 amps so don’t think it would need a relay. The reason for the switch was that I read in the blurb that the unit switches its self off if it does nor detect any movement in the electrical circuit after a period of time. as I have an optimate fitted I wondered if this would be suffiecient to keep the thing switched on.
