# Wanted, Bowl for a VHB 30 carburettor.
**URL:** https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517
**Category:** Wanted - parts etc
**Created:** [13 August 2026 19:13 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517 "2026-08-13T19:13:15Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Godfrey](https://forum.motoguzziclub.co.uk/u/Godfrey)
#### Post date: [13 August 2026 19:13 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517/1 "2026-08-13T19:13:15Z")
Ordered a pair of VHB 30 carburettors from the Netherlands only to find the accelerator pump internals missing, and today after finally getting the missing bits fitted and firing her up, that the left bowl is leaking where it has had a hit on its side and created a hairline crack, I don’t suppose there’s much that would seal it so I’m looking for a bowl please if someone has one spare. I’m also guessing that the bowls are not sided, but in case they are, it’s the left hand one I’m needing.
Now got one👍🏻
---
### Author:  [@Barry\_Conway](https://forum.motoguzziclub.co.uk/u/Barry_Conway)
#### Post date: [13 August 2026 19:53 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517/2 "2026-08-13T19:53:22Z")
If you draw a blank here: Eurocarb for all\* things Dellorto carbs…
\*That’s actually _most things_ when it comes to VHB30’s.
> **[VHB / VHBZ / VHBT Parts Archives - Eurocarb](https://www.dellorto.co.uk/product-category/dellorto-motorcycle-carburettors-parts/dellorto-vintage-carburettors-and-parts/vhb-vhbz-vhbt-parts/)**
>
> The VHB carb. hasn’t been made since the early 1980s but we still have just about everything in stock for them. Please click on the PDF link above, choose the part you need and click on the “details” link on the corresponding part below.
---
### Author:  [@Godfrey](https://forum.motoguzziclub.co.uk/u/Godfrey)
#### Post date: [13 August 2026 20:46 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517/3 "2026-08-13T20:46:36Z")
Thanks Barry. I missed that they had them when ordering gaskets and seals.
---
### Author:  [@John51](https://forum.motoguzziclub.co.uk/u/John51)
#### Post date: [18 August 2026 10:47 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517/4 "2026-08-18T10:47:58Z")
You could try JB weld?
Amazing stuff, my mate sealed his Manx Norton fuel tank , which was cracked.Totally fixed it.
Buy the original, not the quick cure, definitely not as good.
---
### Author:  [@Godfrey](https://forum.motoguzziclub.co.uk/u/Godfrey)
#### Post date: [18 August 2026 14:38 UTC](https://forum.motoguzziclub.co.uk/t/wanted-bowl-for-a-vhb-30-carburettor/24517/5 "2026-08-18T14:38:38Z")
Now getting a replacement of this cracked one. Eurocarb only listed second hand ones and only for the VHB that have the integral bowl nut and jet, and not the one I needed for an accelerator pump type securing nut..
