# Wiring for startus interuptus
**URL:** https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481
**Category:** Big Block Tonti and Loop Frame models
**Tags:** clicknostart
**Created:** [25 June 2024 12:59 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481 "2024-06-25T12:59:38Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [25 June 2024 12:59 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/1 "2024-06-25T12:59:38Z")
Hi, looking to do the mod. and dont really want to spend 60 dollars to get a kit from USA with a wire and fuse? Is it as simple as running a heavier (16) wire from the +ve battery terminal to the starter relay terminal 30 with a 15A fuse or is there more to it? Thanks
---
### Author:  [@Brian.Dillamore](https://forum.motoguzziclub.co.uk/u/Brian.Dillamore)
#### Post date: [25 June 2024 15:40 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/2 "2024-06-25T15:40:01Z")
sounds like it, I bought a Halfords (other brands available) inline fuse with tails, you can use the redundant cable as a switched live if you want.
---
### Author:  [@SimonD](https://forum.motoguzziclub.co.uk/u/SimonD)
#### Post date: [25 June 2024 21:31 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/3 "2024-06-25T21:31:06Z")
Yes, simply run a fused live to the relay from the battery, and disconnect the jumper.
This means that the starter solenoid current does not flow through the ignition switch - but the relay won’t operate unless the ignition is on!
I originally fitted a 15A fuse, but it needs to be bigger, 20A might do, 30A is ok.
---
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [25 June 2024 21:58 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/4 "2024-06-25T21:58:58Z")
Thanks very much, sounds much simpler than some of the stuff I have read on the net
---
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [25 June 2024 22:00 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/5 "2024-06-25T22:00:37Z")
Thanks very much for your reply, hopefully I can get that sorted
---
### Author:  [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)
#### Post date: [26 June 2024 15:05 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/6 "2024-06-26T15:05:45Z")
What bike are we talking about? It is simple on the older bikes such as the T3 and Spada, slightly more involved on the modern bikes, but the principle is the same for all.
---
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [27 June 2024 13:37 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/7 "2024-06-27T13:37:37Z")
Hi, its a 2009 Bellagio?
---
### Author:  [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)
#### Post date: [27 June 2024 16:09 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/8 "2024-06-27T16:09:02Z")
Have a read of this thread,
> **[Bellagio (sorry) starting issues](https://www.grisoghetto.com/t3849-bellagio-sorry-starting-issues)**
>
> Hello, I know this place is all GRiSO, all the time, but I thought id just ignore that and ask a Bellagio question. Hope it's not a sacking offence... I have a
---
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [28 June 2024 08:02 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/9 "2024-06-28T08:02:19Z")
Thanks for that, yes lots of stuff, not all of which I understand but it seems that fused cable direct from the battery helps in all cases. Cheers
---
### Author:  [@Don-Spada](https://forum.motoguzziclub.co.uk/u/Don-Spada)
#### Post date: [28 June 2024 09:17 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/10 "2024-06-28T09:17:51Z")
This is an image I saved long ago. Locate the starter relay and find the yellow feed wire (which should be live when the ingition is on) Cut that so you have a couple of inches spare on the terminal, tape up the loose end.
Run a new live feed from the battery, via a fuse, to the yellow wire into the relay.
---
### Author:  [@Moopants](https://forum.motoguzziclub.co.uk/u/Moopants)
#### Post date: [28 June 2024 15:27 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/11 "2024-06-28T15:27:38Z")
Thanks again, the wiring diagram is appreciated
---
### Author:  [@S\_Piper1](https://forum.motoguzziclub.co.uk/u/S_Piper1)
#### Post date: [17 September 2024 17:38 UTC](https://forum.motoguzziclub.co.uk/t/wiring-for-startus-interuptus/18481/12 "2024-09-17T17:38:47Z")
Try wiring products, I have found this a useful company for all things electrickery