Breva 1100 Front Fork Damper M10 Fastener Torque

Technical All CARC models
1

Item 11 on the parts list, M10 x 35 socket head screw with blue Loctite.

I can’t readily find a recommended torque figure for this fastener. I’m thinking around 25nm would suffice but can anyone advise? Thanks.

Breva 1100 front forks
Breva 1100 front forks677×626 61 KB

2

You can go upto 40Nm for m10, but 25 would be what I would use, think there is a copper washer so if that is annealed it should work as a lock washer plus the bolt won’t fall out as the spindle would stop that.

I didn’t think it was a m10.

1 Like
3

Thanks, Brian.