NF Speedo

Technical Big Block Tonti and Loop Frame models
1

I have aquired a very lovely speedo from a Nuovo Falcone.
Any one know if it would work on a big block Tonti???

2

I think the answer is “possibly”. The gauges on big block Guzzis are not all the same. Some are calibrated to 140mph and some to 160 ( if I remember correctly ).

A picture would help, or failing that, a description of your speedo.

3

I’m talking b… rubbish again. Ignore my previous post. NF speedo’s are more lke the loop frame items, which I guess is what you’re askng, and I can’t answer.

I’ll get my coat.

4

I’ll take “possibly”
Too hot for a coat :sunglasses:

5

My “Grease Monkey” who has both a NF and a big block Cali says:

The NF speedo is driven by the front wheal, which is 18". So as long as a respective speedo drive is installed it should work fine. Only problem he could see is the lower indicated speed range (the indication on the NF stops at 160km/h (100mph approx.)

6

Thanks for the info. The bike will be in Southern Greece where 100mph would be brave so not worried about max. Now to source a speedo drive…

7

The small block twins run a drive from the front (18") wheel. Downside is that they are made of cheese so finding a good one could be tricky.

Also it fits in the spacer stack for the spindle so you will need to be able to allow for that.