Replacement switchgear wiring

Technical Frequently Asked Questions
1

this is from my notes:
From my notes the Yam wiring is as follows:-
Horn= Pink
Earth = black
Right turn =Dark Green
Turn common = Brown/white
Left turn = Dark Brown
High beam = Yellow
Flash = red/yellow
Dip = light Green
Light common = Blue/Black

On My G V1000 the Guzzi wires are:
Horn= white/black
earth=blk
right turn=grey/red
turn comm=brown with a tag on it
Left turn=green /black
High beam=Greyor slate
flash=grey/black
Dip=Light green
light common=blue/black

I have a Triumph switch that is as follows

horn= Black with 2 grey trace

earth=Brown/black with 2 grey trace

right turn=light blue 2 grey trace

turn comm=grey 2slate trace

Left turn=orange

High beam=blue with slate tracex2 these must be joined as org had twin headlamps

Flash= Red/Black

Dip=white Grey

Comm Light =Blue white

i hope this helps
Ken

I have copied NW on this but I do NOT have the lights on off on the left it has been transposed to the right hand bars so those wires you will have to figure out there is a web site with alt switchgear wiring on it it may be carl allisons site but not sure if i find out any more i will let you know.

You can test functions by using a meter if you get the comm turn the left and right will be apparrent. you can do the same with main and dip and flash
The dodgy one is the horn as it will blow a fuse if you get it wrong. lol

You can call me if yu have proba BBB has my Number

Edited by guzzibear - 10 Aug 2008 at 18:41

2

Not sure if I should post this here or in the NON-OEM section … sure it’ll get moved if needs be. As part of an ongoing project I have needed discover the wiring pin-out from a Suzuki TS185ER left hand switchgear. This has horn, indicators, lights on/off and main/dip. As the subject comes up fairly regularly, someone may find this helpful. Suzuki TS185ER Handlebar switch continuity check  Horn (loose wires)  Black/White earth  Dark Green Power from the horn to the switch  Indicators  Right Indicators  Light Blue Power from indicator relay  Light Green Power to signal indicator and right indicators  Left Indicators  Light Blue Power from indicator relay  Black Power to signal indicator and left indicators  Lights  Dimmer Switch  Dip Beam Grey - White continuity  Main Beam Grey - Yellow continuity • Yellow Power too main beam and main beam indicator • White Power to dip beam  Lighting Switch  OFF White/Red - Green/White continuity  ON White/Red - Grey continuity • Green/White Power to the Magneto Resistor (voltage regulation) • White/Red Main power in • Grey Power to the Dimmer Switch, speedo, tacho and rear lights


Lawrie in Eastbourne 2004 California Stone +

3

Switchgear available here

http://www.allensperformance.co.uk/products-throttles.html